Upright pianos differ mainly in height. Most are about 5 feet wide and 21 to 26 inches deep, while height runs from roughly 36 inches for a small spinet to about 52 inches or more for a full-size professional upright. Weight follows height: expect anywhere from a few hundred pounds to well over 600. This guide gives you the numbers by type, real manufacturer specs, and a simple way to check that a piano will fit your room and get through your doors.
TL;DR
- Width is nearly fixed, at about 5 feet, because every full upright carries the standard 88-key keyboard. Height is what separates the sizes.
- Dealers commonly group uprights into spinet, console, studio and full-size or professional models, from shortest to tallest.
- Manufacturer specs for current uprights show weights from about 384 lb to 650 lb, so one “average” weight is unreliable.
- Depth, usually 21 to 26 inches, decides how much floor space you lose, since uprights sit against a wall.
- Measure the room, the wall and every doorway and turn on the delivery path before you commit to a model.
Table of Contents
- Upright piano sizes at a glance
- Why height is the number that matters
- The four upright types
- Real specs from current models
- How heavy is an upright piano?
- How to measure for your room
- Getting it through the door
- What size does to the sound
- Choosing a size by situation
- Perspective
- Learn how uprights work from the inside
- FAQ
- Sources
Upright piano sizes at a glance
The table below summarizes the usual ranges. Category names and boundaries are trade conventions, not a legal standard, so a few inches of overlap between dealers and makers is normal. Weights are broad ranges from the manufacturer sources cited later in this article, and individual models can fall outside them.
| Type | Typical height | Typical width | Typical depth | Typical weight |
|---|---|---|---|---|
| Spinet | about 36 to 40 in | about 58 in | about 24 in | lighter end, a few hundred pounds |
| Console | about 40 to 44 in | about 58 in | about 22 to 24 in | a few hundred pounds |
| Studio | about 45 to 48 in | about 58 to 60 in | about 22 to 26 in | roughly 400 to 550 lb |
| Full-size / professional | about 48 to 52 in and up | about 60 in | about 24 to 27 in | roughly 500 to 650 lb |
The only thing you can count on is the pattern: a taller case usually means more string length, more soundboard and more weight.
Why height is the number that matters
When people ask about the size of an upright, they are almost always asking about height. The Piano Buyer’s Model & Price Supplement explains that “size” for a vertical piano means its height from the floor to the top, and that height is the dimension that varies significantly and relates to the quality of the instrument.
The width barely moves. Yamaha notes that almost all pianos, grands and uprights alike, are about 5 feet wide because of the standard 88-note keyboard. The same page puts upright heights at 45 to 52 inches and depths at 21 to 26 inches for the models it covers.
So when you compare two uprights, a three-inch difference in depth changes how the piano sits in the room, but a four-inch difference in height changes what is inside the case.
The four upright types

Spinet
The spinet is the smallest upright, generally around 36 to 40 inches tall. It is the type people picture in a small apartment or a hallway. Because the case is so short, the action sits low in the cabinet and the strings are short, which limits bass depth and volume. Many spinets were built decades ago, so you are most likely to meet one as a used instrument.

Console
Consoles run about 40 to 44 inches tall. They are a step up from the spinet in string length and are often chosen for furniture-style cabinets that fit under a window or along a short wall. Width stays close to 58 inches and depth to around 24.
Studio
Studio uprights stand around 45 to 48 inches. This is the size you see in school practice rooms, teaching studios and many family living rooms. It is tall enough to deliver a fuller sound, yet it still clears most windowsills and fits under standard ceilings without trouble. Studio models such as the Yamaha P22 and P660 are listed at 45 inches high.
Full-size or professional upright
At about 48 inches and above, up to roughly 52 inches or more, you are in full-size territory. These are the tallest, heaviest and, generally, most capable uprights, with the longest bass strings and largest soundboards. Some older or specialty instruments go taller still.
One wrinkle: some studio models have a soundboard larger than their height suggests. Not every maker draws the lines in the same place, so the model’s published specifications tell you more than the category label does.
Real specs from current models
Category ranges are useful for shopping, but actual models vary. These figures come straight from manufacturer spec pages.
| Model | Height | Width | Depth | Weight |
|---|---|---|---|---|
| Yamaha b1 | 43 in | 58.3 in | 21.3 in | 384 lb |
| Yamaha b2 | 44.5 in | 59 in | 21 in | 428 lb |
| Yamaha b3 | 48 in | 60 in | 24 in | 522.5 lb |
| Yamaha P22 | 45 in | 60 in | 24 in | 527 lb |
| Yamaha P660 | 45 in | 58 in | 23 in | 520 lb |
| Boston UP-118E | 46.5 in | 59.25 in | 23.5 in | 553 lb |
| Yamaha U1 | 48 in | 60 in | 24 in | 502 lb |
| Yamaha U3 | 52 in | 60 in | 26 in | 517 lb |
| Steinway K-52 | 52 in | 60 in | 26.75 in | 650 lb |
Sources: the Yamaha b Series, P Series and U Series spec pages, the Boston UP-118E page, and the Steinway K-52 page.
A few things stand out. Width is almost identical from the 43-inch b1 to the 52-inch U3, within about two inches. Depth ranges only from about 21 to nearly 27 inches. Weight does not climb in a straight line, either: the 45-inch P22 and the 52-inch U3 are within ten pounds of each other, because build, cabinet and materials matter as much as height.
Yamaha U3 dimensions
Because it is one of the most searched models: Yamaha lists the U3 at 52 inches high, 60 inches wide and 26 inches deep, weighing 517 lb. Its spruce soundboard measures 2,369 square inches, and the speaking length of the longest bass string is 47.5 inches, per the U Series specs page. The U1 beside it is 48 inches high, 24 inches deep and 502 lb.
How heavy is an upright piano?
Heavy enough that it is a two-person job at the very least and, realistically, a professional job. Published ranges vary because makers and models do.
- Yamaha says upright pianos weigh approximately 200 to 270 kg, which is about 440 to 595 lb.
- Kawai America gives a broad range of roughly 400 to 600 lb for typical uprights.
- Yamaha’s own listings show how a single average misleads: the YUS1, YUS3 and YUS5 are 502, 517 and 530 lb.
A useful rule of thumb: a small spinet or console sits at the lighter end of these ranges, a studio in the middle, and a full-size professional upright at the top or beyond. Older uprights with heavy cabinets can exceed modern ones of the same height, so treat any figure for an unfamiliar vintage piano as a minimum and ask for the model’s actual weight.
Weight and your floor
A 500 lb piano concentrates its weight on a small footprint, mostly through its legs or casters. On a standard floor that is rarely a concern. If you have underfloor heating, Yamaha advises checking with the heating manufacturer about supporting the piano’s weight, avoiding casters directly over the heat source and keeping room conditions stable.
How to measure for your room
Uprights are designed to stand against a wall, so three numbers decide whether a piano fits: height, width along the wall and depth out from it.
- Wall space. Measure the width of the wall section where the piano will go. Add a little for comfort: allow at least a few inches either side, because a piano jammed into a corner is hard to service. A 60-inch piano needs a wall that is clearly longer than 60 inches.
- Depth. Measure from the wall to where the front of the keyboard would sit, then leave room for the bench and your legs. A 26-inch-deep piano plus a bench and player takes up more floor than the piano footprint suggests, and Yamaha points out that depth is particularly important because uprights sit against walls.
- Height. Measure from the floor to the top of the lid on the model you are considering. Check windowsills, wall-mounted art, shelving, and any sloped ceiling above the spot.
- Obstructions. Look at baseboards, heating registers, radiators and floor vents behind the piano. A baseboard can keep the piano a couple of inches off the wall, which changes your depth math.
Write the measurements down with the model’s published specs next to them. Pull the numbers from the maker’s spec page rather than a general category range, since a 4-inch spread inside a category is common.
Placement tips that protect the instrument
Keep the piano away from direct sunlight, exterior doors, heating and cooling vents, and damp walls. Humidity swings affect the soundboard, pins and action, and they are the main reason a piano drifts out of tune. A stable interior wall is usually the best spot. If you are planning regular care, our guide on what piano tuning costs in the U.S. gives you a sense of what to budget.
Getting it through the door
Most of the trouble with piano delivery happens before the piano reaches the room. An upright moves depth-first through a doorway, so its 21 to 26 inch depth is what must clear the opening, not its 60-inch width. A standard interior door is usually wide enough for that. The tricky parts tend to be:
- Turns and landings. A tight corner or a short hallway makes the piano pivot, and the piano’s length effectively becomes a swing radius.
- Stairs. Stair width, riser height, handrails and the headroom under any low ceiling matter more than the door width.
- Thresholds and steps outside. Porch steps, uneven paths and narrow storm doors add risk.
- Floor protection. Hardwood, tile and stone can all be marked by casters or by a dolly.
Measure the narrowest point of every doorway and the tightest corner on the route, and photograph the path. Share the piano’s make, model and approximate height with your mover so they can plan the equipment and crew. Because of the weight and the injury risk, moving an upright is a job for people with the right equipment and training; do not improvise with friends and a hand truck.
If you want to understand the safe-handling side, such as how pianos are strapped, tilted and carried on stairs, we cover it in our Piano Moving Online Course.
What size does to the sound
Height is a proxy for what happens inside the case. A taller upright has room for longer strings and a larger soundboard, which generally means a fuller bass, more tonal color and more dynamic range. That is the reason many buyers who have the ceiling and wall space go as tall as they can, and why teachers often prefer studio and professional models.
The plate, the cast iron frame that holds string tension, also shapes tone; if that interests you, see how a piano’s plate affects the tone. The takeaway for buyers is simple: if two pianos are in your budget and both fit, the taller one usually offers more musical room to grow. Still, play each instrument. Build quality, the condition of the action and the hammers, and how the piano was maintained often matter more than a couple of inches.
Choosing a size by situation
- Small apartment, light use. A console or compact studio keeps the footprint modest. Look for a model you can actually move into place.
- Child starting lessons. A studio upright gives a real piano touch and a stable tuning without the footprint of a full-size cabinet.
- Serious student or teacher. A full-size or professional upright, around 48 to 52 inches, if ceiling and wall allow.
- Used or older piano. Confirm actual dimensions and weight, and have a qualified technician check the action, pinblock and soundboard before you buy. A sticking key or loose action part is often fixable; see our guide to sticking piano keys.
Perspective
Every week we hear from people who bought a piano based on how it looked in a showroom, then learned what its size meant for the room, the move and the long-term care. After teaching piano technology online since 2009, our view is simple: size is a maintenance question as much as a furniture question.
A taller upright has longer strings, a bigger soundboard and more mass. That is why it sounds bigger, and also why it deserves a technician who understands regulation, voicing and tuning stability. Whether the piano is a 43-inch console or a 52-inch professional, the action works the same way, and a well-regulated small piano will outplay a neglected large one.
That is why we built our courses around hands-on competence: the Piano Tuning and Repair course is designed to prepare students for the Piano Technicians Guild RPT exam, and our Piano Moving course covers the safety side so that the instrument and the people carrying it arrive in one piece. If you plan to own, service or work around uprights, learning how they are built is the best investment you can make.
Michael
Learn how uprights work from the inside
If you are curious about what is inside the case, or considering a career in piano tuning and repair, we teach it online and at your own pace. Our Piano Tuning and Repair Online Course is priced at $1,990, and our Piano Moving Online Course is $99.
For hands-on practice, our Upright Piano Action Model lets you study the mechanism up close, and you can browse our tools collection when you are ready to build a kit. Our guide to piano repair tools explains what to buy first.
FAQ
What is the standard size of an upright piano?
There is no single standard, but most uprights are about 58 to 60 inches wide, 21 to 26 inches deep and between roughly 36 and 52 inches tall. Height is the dimension that changes from model to model. For a typical studio upright, think 45 to 48 inches high, 60 inches wide and about 24 inches deep.
How much does an upright piano weigh?
Most uprights fall between roughly 400 and 650 lb. Yamaha cites about 200 to 270 kg, and Kawai America gives a range of about 400 to 600 lb. Specific models differ, such as the Yamaha b1 at 384 lb and the Steinway K-52 at 650 lb, so check the weight for the exact model.
What are the dimensions of the Yamaha U3?
The Yamaha U3 is 52 inches high, 60 inches wide and 26 inches deep, and weighs 517 lb according to Yamaha USA. The U1 is shorter at 48 inches high and 24 inches deep. Both are 60 inches wide.
Which upright size is best for a small room?
A console or a compact studio upright is usually the easiest to place, because the width is nearly the same across upright types and depth only varies by a few inches. Check the wall length, leave room for the bench, and make sure the delivery route works before you buy.
Does a taller upright sound better?
Often, yes. Taller cabinets hold longer strings and larger soundboards, which tends to give a fuller bass and more dynamic range. Condition, regulation and tuning stability matter just as much, so play the piano and have a technician evaluate any used instrument.
Sources
- Piano Buyer Model & Price Supplement
- Yamaha: What’s the Best Piano for Your Room?
- Yamaha P Series specs
- Yamaha b Series specs
- Yamaha U Series specs
- Boston UP-118E
- Steinway K-52
- Yamaha FAQ on pianos and underfloor heating
- Kawai America FAQ: grand vs. upright
- Yamaha YUS Series
