Keytop polishing starts with one question: are your keys plastic or ivory? Plastic tolerates more cleaning and can take a buff. Ivory is porous, glued on in two pieces and easy to ruin with water, alcohol or abrasives. Identify the material first, clean with the gentlest method that works, and leave true polishing and sanding to someone with a workshop unless you are training to do it yourself.
This guide covers all of it: how to identify your keytops, how to clean ivory and plastic keys, what polishing really involves, which products to avoid, and where home care ends and technician work begins.
TL;DR
- Check the material first. A seam between head and tail, a creamy tone and fine grain point to ivory. One smooth, uniform piece points to plastic.
- For both materials, start with a soft white cloth, a little water and at most a trace of mild soap. Wipe back to front and dry right away.
- Skip solvents, bleach, citrus and abrasive scrubbing. Ivory is far less forgiving than plastic.
- Real polishing means fine sanding and machine buffing. It can burn plastic and damage ivory, so it belongs in a workshop.
- Loose, chipped or badly yellowed keytops are a job for a technician, and often for keytop replacement.
Table of Contents
- Step one: find out what your keytops are made of
- Clean first: it solves most dull-key problems
- What to keep away from your keys
- What keytop polishing actually involves
- When to do it yourself and when to call a technician
- Perspective
- Learn the repair skills behind the polish
- FAQ
- Sources
Step one: find out what your keytops are made of
Every decision after this depends on the material. Most pianos made after the 1950s have plastic (acrylic) keytops. Older instruments, typically from before then, often have natural ivory. Some modern pianos use synthetic ivory-style materials that are more sensitive to chemicals than ordinary plastic, so treat any unusual surface with extra caution.
You can usually tell by looking closely, in good light:
| Check | Ivory | Plastic |
|---|---|---|
| Construction | A faint seam where the wide head meets the narrow tail | One continuous piece |
| Color | Creamy or yellowed, with natural variation from key to key | Uniform, often bright white |
| Surface | Fine grain, curved lines or swirls | Smooth, glossy, no pattern |
| Feel | Slightly satin, a bit of grip | Smooth and slippery |
| Damage | Sharp chips, hairline cracks, lifting at edges | Scratches, dulling, crazing |
A magnifying glass helps if the grain is hard to see. Ivory also glows bright bluish white under ultraviolet light, while plastic looks darker, according to the Music Industries Association. The same source notes that the CITES ban on international ivory trade came into force in 1989, so instruments from reputable makers built after that date will not have ivory keytops.
If you cannot decide, treat the keys as ivory. That is the safe default, because every method gentle enough for ivory is also fine for plastic.
What the age of the piano tells you
A 1920s upright with yellowed, seamed keys is almost certainly ivory. A spinet from the 1970s with bright, glossy white keys is plastic. The middle ground is where mistakes happen: an older piano may have had its keytops replaced, so one instrument can carry plastic that is decades old and has itself turned dull or brittle. Judge the keys in front of you, not the date on the fallboard.
Clean first: it solves most dull-key problems
Before anyone sands or buffs anything, clean the keys properly. Grime and skin oils make keys look dull and gray, and many owners think they need polishing when they only need cleaning.
The Piano Technicians Guild recommends a soft cloth dampened with water and a small amount of mild soap. Wipe from the back of the key toward you rather than side to side, clean only a few keys at a time and dry immediately. Ivory is porous, and too much moisture can loosen its glue joints. Dirty or brightly colored cloths can transfer stains, so use a clean white one.
A simple routine
- Fill a small bowl with lukewarm water. Add one drop of mild dish soap, or none at all for the first pass.
- Dip a soft white cloth, then wring it until it feels barely damp. Less moisture than you think you need is the right amount.
- Wipe a handful of white keys, back to front, in light strokes.
- Dry them at once with a second clean, absorbent cloth.
- Move on in small groups. Do the black keys last with fresh cloths.
- Finish with a once-over so no key has standing liquid between it and its neighbor.
Keep water off the sides of the keys and away from the gaps. If a key starts to stick afterward, moisture has probably swollen the wood or the felt bushings. Our guide to sticking piano keys explains causes and fixes.
Cleaning ivory specifically
The Canadian Conservation Institute says ivory keys can be cleaned with a cloth or swab slightly dampened with water and a few drops of detergent, but they should never get too wet, since ivory can react to water. It also advises against bleaching keys, because the effect is only temporary and bleach can damage ivory.

That last point matters if you searched for ways to clean ivory piano keys and found whitening tricks involving peroxide, toothpaste or baking soda. Some repairers do report using strong peroxide on ivory, but it is a risky experiment on keys you cannot easily replace. A smudge-free, evenly toned set of ivories is a good result. A warm, aged cream color is normal for the material.
Cleaning plastic keys
Plastic is more tolerant. The same damp-cloth method works, and stubborn marks on modern plastic can often be lifted by pressing a little harder with a slightly moistened lint-free cloth, as MusicRadar suggests. Use a microfiber cloth in place of a paper towel when you can, because wood-pulp towels can leave fine scratches on polished surfaces.
What to keep away from your keys
The list of things people try is long, and most of them do harm. The Piano Technicians Guild advises avoiding chemicals and solvents on keys, and warns against lemon oil, cheap furniture polish and silicone aerosol sprays on the piano’s finish. Steinway & Sons tells owners never to use solvents of any kind on black or white keys, and not to use bleach-based disinfectants or anything containing citrus.
In practice, that means:
- Bleach and bleach wipes. They can break down plastic and leave ivory chalky.
- Citrus cleaners and lemon juice. Ivory is dentine, essentially tooth material, and acid etches it.
- Solvents, acetone and nail polish remover. They can cloud or soften plastic and are never appropriate for keys.
- Scouring pads, scrubbing brushes and abrasive pastes. They scratch and leave uneven patches.
- Heavy water. It lifts ivory glue joints and swells key wood.
- Silicone sprays. They leave a film and can migrate into places they should never go.
A cautious note on disinfecting: Steinway says diluted alcohol-based disinfectants may be used and that over-the-counter hydrogen peroxide is safe for disinfecting keys. If you need to sanitize a shared or studio piano, follow the maker’s guidance, use as little liquid as possible and test a spot at the far end of the keyboard first. On ivory, stay with water and reserve any alcohol for persistent marks.
What keytop polishing actually involves
Cleaning removes dirt. Polishing changes the surface itself. That is a different job, and it differs by material.
Polishing plastic keytops
Acrylic is the most common modern keytop material. A technical article in the Journal of American Organbuilding, hosted by the Piano Technicians Guild, describes acrylic as hard and durable and as holding a buff well. The same article notes that mineral plastic takes a softer sheen than acrylic when buffed. So there is a real finish to restore, and a technician can bring dulled plastic back to a clean gloss.
The typical professional sequence is:
- Clean the keys thoroughly so grit does not get ground in.
- Remove light scratches and dullness with progressively finer abrasives, using water.
- For deeper marks, a technician may use wet-or-dry sandpaper in several steps, working through finer grades.
- Buff to a gloss with a polishing compound and a soft cloth wheel.
The risk is in the last step. Friction from a spinning buffing wheel can burn or melt part of a plastic key, or change the shape of its sides. A home polishing kit and an electric drill is how plastic keys get ruined. For a light refresh at home, a piano key polish applied with a soft lint-free cloth, following the maker’s directions, is the more cautious choice for plastic or synthetic surfaces.
Polishing ivory keytops
Worn ivory goes through a gentler version of the same idea. A technician hand-sands away the oxidized, grimy top layer with very fine wet-or-dry paper, working up through finer grits, then buffs each keytop with an ivory polish on a soft cotton wheel at low speed. Some use fine steel wool and a dampened white cotton cloth for the final sheen. The ivory layer is thin, so each pass removes material you cannot put back.
That is why the work rewards patience and experience. If you want to learn it properly, the hands-on skills behind it are part of what we teach, which we cover below.
When to do it yourself and when to call a technician
Home care covers the cleaning routine above and a light polish on sound plastic keys. Everything else is better handled in a workshop. The line is clearer if you check the condition of the keys:
| What you see | Reasonable at home? | Better handled by |
|---|---|---|
| Dust, fingerprints, gray film | Yes, damp cloth method | Not needed |
| Dull but intact plastic | Light application of a piano key polish | A technician for a full buff |
| Deep scratches or gouges in plastic | No | A technician with workshop equipment |
| Yellowed but sound ivory | Gentle cleaning only | A technician for sanding and polishing |
| Loose, chipped or separating ivory | Stop cleaning | A technician, who can reglue or replace |
| Missing keytops, greenish tint, brittle old plastic | No | A technician: replacement is usually the answer |
A few points behind that table:
- Loose or chipped ivory: Cleaning can make a fragile keytop worse. Photograph the damage and call a technician rather than pressing the piece back down yourself.
- Restoring ivory: Brightening yellowed ivory is tedious and time-consuming, and many technicians do not recommend it as a DIY job. Where ivories are missing, the sensible fix is often a matching replacement taken from another piano.
- Character versus uniformity: Hairline cracks and a warm patina are part of an older piano’s history. On a restored or collectible instrument, preserving stable original ivory may matter more than getting every key a uniform white.
- Replacement costs: One long-standing shop article puts replacement with modern composite plastic keytops at two or three hundred dollars, as of 2015. Today’s prices vary by piano and technician, so get a current quote. It is also a natural time to replace worn key bushings.
If replacement is on the table, our guide to piano keytop replacement walks through the process, the materials and where DIY makes sense.
Keep keys looking good longer
Prevention is cheaper than restoration. The Piano Technicians Guild advises keeping the keyboard covered when not in use to prevent dust, while noting that ivory keys need some exposure to light to prevent yellowing. Wash hands before playing, wipe the keys lightly every week or two with a barely damp cloth, and keep the piano out of direct sun and away from heating vents.
Perspective
Most keytop problems we hear about begin with a good intention and the wrong product. Someone sees yellowed keys, reaches for a household whitener, and turns a cosmetic issue into a structural one.
Our view is simple: identify the material, clean gently, and treat polishing as a skill rather than a product. Buffing, sanding and keytop replacement are exactly the kind of workshop tasks a trained technician learns step by step, with the feel for how much material is safe to remove.
That is why our curriculum is designed to prepare students for the Piano Technicians Guild RPT exam and covers repair as well as tuning. Keytop work is a good first paying skill because owners need it, can see the result immediately and rarely know how to do it themselves. If you are curious about this work as a trade, learn it properly rather than practicing on someone’s heirloom.
Michael
Learn the repair skills behind the polish
If you enjoy this kind of detailed work and want to do it for owners, you do not need to guess your way through it. Piano Technician Academy is a fully online, self-paced program for people who want to tune and repair pianos, from basic techniques to advanced repair. Our Piano Tuning and Repair Online Course is $1,990 as a one-time purchase, and our curriculum is designed to prepare you for the Piano Technicians Guild RPT exam. You can see the full options on our courses page.
Already working on pianos and want to sharpen specific skills? The Field Repair, Field Regulation and Field Voicing courses are $449 each on our Hone Your Skills collection. If you are setting up a bench, our guide to piano repair tools covers what to buy first, and our overview of how to become a piano tuner covers training, costs and the RPT.
FAQ
Can I use rubbing alcohol on piano keys?
On plastic keys, a very small amount on a soft cloth is a common choice for stubborn marks, though the Piano Technicians Guild advises avoiding chemicals and solvents generally. On ivory, stay with a slightly damp cloth and water, because alcohol can dry ivory out over time. If you want to disinfect, follow the piano maker’s guidance, such as Steinway’s cleaning advice.
Can yellowed ivory keys be whitened?
Gentle cleaning removes grime, but the creamy tone is partly the material aging. Bleaching is not advised, since the effect is temporary and bleach can damage ivory, according to the Canadian Conservation Institute. If you want a brighter surface, ask a piano technician about hand sanding and polishing or about replacement.
Is it safe to buff piano keys with a power tool?
It is not a good idea at home. The friction from a spinning wheel can burn or melt plastic and can change the shape of the key sides. Buffing is workshop work for a technician with the right equipment and technique.
How often should I clean my piano keys?
A light wipe with a barely damp white cloth every week or two keeps most keys in good shape, and a full back-to-front cleaning a few times a year is plenty for most homes. Clean only a few keys at a time, dry immediately and never let liquid run between the keys.
When should I replace keytops instead of polishing them?
Replace them when ivory is loose, chipped or missing, or when old plastic is brittle, deeply scratched or discolored in a way cleaning does not fix. A technician can tell you whether polishing is worth it for your keys. For the process and materials, see our guide to keytop replacement.
Sources
- Piano Care, Piano Technicians Guild
- Basic care of keyboard instruments, Canadian Conservation Institute
- Cleaning Your Piano, Steinway & Sons
- Ivory II: Your Questions Answered, Music Industries Association
- Key-top materials article, Journal of American Organbuilding (hosted by the Piano Technicians Guild)
- How to clean your piano keys, MusicRadar
- The Romance of Ivory: Are Ivory Piano Keys Better?
